Hand Lettering: A Project From Start to Finish

Started by vodanhphd, 05-31-2021

Hand Lettering: A Project From Start to Finish
  05-31-2021, 01:16 PM
Hand Lettering: A Project From Start to Finish

1. Preparing the Tools You Need
Adobe Illustrator
Pen or pencil for drawing
Tracing paper
Optional: Tombow brush pen, pilot parallel pen, Copic marker, Sharpie, or other tools
The optional tools will allow you to develop the weight/contrast in your letterforms. It all depends on the style you're going for. Use your best judgement when picking a tool for the right styling of letters.

2. How to Sketch a Hand-Lettering Design
Step 1
Every project (unless directed by a client of course) starts out with creating/forming your own phrases to write! Begin by making a list of phrases and select whichever phrase you'd like to move forward with throughout this tutorial.

My list is below. I selected the phrase "Comparison Kills" because it's something that is meaningful to me at this particular point in my life. I find if you begin to draw things that actually mean something to you in some way, the outcome is significantly better.


Step 2
The next step after selecting your phrase is to begin cranking out some fast and dirty sketches! Draw as quickly as you can, and use as many variations as you can. Alter the baseline, change the shape, try various lettering styles, etc.

As you can see below, I began to experiment with some blackletter forms. I wanted to challenge myself this time around because I rarely attempt blackletter. It's rather difficult! But I was determined to make it work.


Step 3
After you've sketched enough, select one composition that you think is working best to move forward with. For me, it was the comp in the bottom right corner of the page of sketches I completed.

Use that sketch as the "skeleton" or basic structure. Place a piece of tracing paper on top of your skeleton and begin to add your styling, contrast, width, etc., with whatever tool you please. Whether that's a Tombow brush pen, Copic marker or sharpie, it's up to you!

For this piece of lettering below, I felt the Pilot Parallel Pen was the perfect choice for blackletter forms.

Step 4
Moving forward, it's time to make all the necessary corrections. Place another piece of tracing paper on top of your lettering to begin fixing the kerning, baseline, letterform widths, overall color, etc.

At this point, I was attempting to fill in the negative space towards the bottom right of my composition with an illustration. Since the word "Comparison" is so lengthy compared to the word "Kills", it felt a little off balance to me. You may notice I also made small corrections to the capital "C" and added an extra flourish from the leg of the "K".

Step 5
Just as I was attempting in the previous step, I continued to experiment with various ways to fill that negative space in the bottom right. This sketch is a little crazy, but it was necessary to understand what worked and what didn't.

At this point, continue to make those edits to your composition to perfect your lettering. In this particular sketch I noticed my baseline was all over the place! In the next few steps, I make slight adjustments to make it a little more even.

Step 6
Once you get your lettering to a decent place with the tools you're using, it's time to move on to pencil. The tools are great to provide you with consistent weights and angles within your letterforms, but the pencil allows you to make those fine adjustments to really bring the lettering home.

Once again, trace your lettering, making optical corrections, but this time trace it using a pencil to perfect the tiny details.

Step 7
Keep progressing with those pencil sketches by tracing over your previous piece. Each time you draw and redraw your piece of lettering, it will take on a much cleaner and more refined look.

As you can see below, I'm still attempting to fill that awkward negative space next to the word "Kills". It's a little troublesome, but in the next step you can see how I ended up fixing that issue.

Step 8
The pencil sketch is nearing completion! I finally decided to add in an illustration of a coffin to be a little more literal with the word "Kills". Remember, if you decide to incorporate illustrations into your lettering, make sure they work alongside the lettering. You want your illustration and lettering to go together and play off each other, rather than feeling like two separate entities.

Also, you may notice that at this stage I was experimenting with drips extending from the lettering to add a bit of style to the piece. It's an extra touch that makes the lettering more interesting/engaging in my opinion.

Step 9
I've finally come to the end of the pencil sketches. The finished pencil sketch is complete, and now it's time to take it further in Adobe Illustrator. There are still minor corrections to make on this piece, but I felt I could take care of those edits in the "vectoring stage" of the process.

Once you've reached this point, scan your lettering onto your computer and prepare to vector on top of it within Illustrator.

Here's a process GIF that shows the evolution of the pencil sketches. It's crazy to see how horrible the first sketch was, but it has evolved into something much greater. The process is the best part!

3. How to Digitize Hand Lettering
Now it's time for my favorite aspect of the hand-lettering process, vectoring! Figuring out how to digitize hand lettering varies depending on the project. It's going to be rather difficult vectoring some blackletter forms, but that's alright! It will just require a little bit of extra time to get things looking right. Let's begin!
Step 1
For me, it's easiest to begin by outlining your sketch using the Pen Tool. We are essentially working with only strokes at this point. Start left to right and work your way around each individual letterform, outlining as you go. It helps to create individual shapes for letters such as the "i" or the "m". That way, you can go back and edit the pieces while they're still separated, instead of altering an entire letter.
Below is a really rough quick pass around the letters. This was done just to lay down the initial anchor points, which we will later tweak and edit further.
[Image: 2015_04_FinalProject_Vectoring_step1.jpg]
Step 2
Next, we're going to begin to invert those strokes into solid shapes. Once you fill in your letterforms, you'll notice lots of changes you probably need to make, such as correcting the weights, contrast, widths, etc., once again.
You know the drill! Begin wherever you see fit to perfect your lettering until completion.
[Image: 2015_04_FinalProject_Vectoring_step2.jpg]
Step 3
I've begun to make all of the weights consistent and corrected a lot of the contrast issues as well. I even rounded a lot of the edges of the letterforms so they wouldn't feel so harsh.
If need be, begin to make further edits to really drive your lettering home. At this stage, I'm feeling it's at the right spot to continue to add some stylization to the lettering. In this case, I'm going to bring back some of the "drips" I drew in my initial pencil sketches.
[Image: 2015_04_FinalProject_Vectoring_step3.jpg]
You can see below how I incorporated the drips within the lettering. I drew all of the drips separately with the Pen Tool and placed them on top of the lettering. This way, if changes are needed to the drips, you won't have to edit the letterforms as well.
[Image: 2015_04_FinalProject_Vectoring_step4.jpg]
[Image: 2015_04_FinalProject_Vectoring_drips2.jpg]
Step 4
To take the dripping effect to the next level, I drew various additional drip-like shapes with the Pen Tool and placed them all over the lettering. It may be rather difficult to see in the below image, but you can see the effect we're going for in the "What You'll Be Creating" image at the top of this tutorial.
To develop the secondary drips, it's essentially the same process as above, although these are strokes instead of shapes. Use one darker-valued stroke for the "shadow" of the drip and a couple of lighter-valued strokes for the "reflection". There's a close-up image of the drips towards the end of this tutorial as well.
Again, I drew these drips separately and laid them on top of the lettering afterward.
[Image: 2015_04_FinalProject_Vectoring_step5.jpg]
[Image: 2015_04_FinalProject_Vectoring_drips.jpg]
Step 5
After all of that is completed, you now have the option to change hues, values, etc. to your liking! The below image is the final piece after all of the steps are completed. It sure was a lengthy process, but certainly worth it I hope!
[Image: 2015_04_FinalProject_Vectoring_step6.jpg]
[Image: 2015_04_FinalProject_Finalvector.jpg]
As always, here is the process GIF of the vectoring stage to show the steps taken to reach the final piece of lettering. The smallest changes make all the difference!
[Image: 2015_04_FinalProject_vectorProcess.gif]

  06-01-2021, 12:14 PM
Amazing. Thanks for this.

  06-15-2021, 03:14 AM
Great guide. I use a similar method but learned a thing or 2.

« Next Oldest | Next Newest »

Possibly Related Threads…
Thread Author Replies Views Last Post
Hand Lettering: How to Vector Your Letterforms vodanhphd 0 686 05-31-2021, 01:20 PM
Last Post: vodanhphd

1 Guest(s)